Vibro Sifter


Vibro Sifter

or Vibro separators are circular unitary gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle size, having very wide range applications. This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off cantered weights at the top and bottom end of the motor shaft.

The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight acts to tilt the machine which causes vibration in the vertical tangential axis. The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern. Thus, the material moves across the screens and also in the vertical and tangential planes enabling maximum screening. “LODHA” Vibro sifter are available with a wide range of possible screen sizes (mesh) Option for multiple deck separation is also possible.

The vibro sifter unit consist of Specially designed vibratory motor to run on 400/440V, suitable HP, 3 phase, 50 cycles electric supply, with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the centre of the base plate of screening unit. Screening unit of the vibro sifter consists of SS 304 screen sandwiched between SS 304 hopper and bowl with the help of special clamp with gasket. This in turn is clamped to the base plate. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.



Vibro Sifter Special Features:

  • High Speed, Maintenance Free & Noiseless
  • Different Screening diameter of 12”, 20”, 30” , 36”, 48”, 72” etc
  • Compact and Portable
  • Electric Power Requirement depends on kind of industries & energy consumption
  • Consumption compared to reciprocating vibratory system.
  • TEFC motor explosion proof / flame proof motor material standard machines
  • SS 304 AISI all contact parts & screen are of stainless steel material.
  • Quality contact parts of SS 316 are optional.
  • Brushing arrangements, SS lid with charging port and spring loaded outlets are special requirements.
  • For contact parts easy dismantling and cleaning facility.
  • Different Range of screen sizes 4-300 Mesh.
  • Along with outlet and hopper for bottom deck for Double & Triple deck screens is available on request.
Technical Specification of Vibro Seperators:

Model LI-VS 20” LI-VS 30” LI-VS 48”
Screens SS 304 SS 304 SS 304
Screen Diameter 508 mm 762 mm 1200 mm
Capacity/Hour * 20 to 140 Kgs 30 to 200 Kgs 200 to 400 Kgs
Charging height 1110 mm 1250 mm 1340 mm
Discharging height 690 mm 790 mm 850 mm
Electric Motor 0.25 HP special vibratory motor 0.5 H.P. special vibratory motor 1.5 HP special vibratory motor
Net weight (Approx.) 150 Kgs 200 Kgs 350 Kgs
Gross weight (Approx.) 200 Kgs 260 Kgs 420 Kgs
Machine Dimension (in mm) 700mm x 700 mm x 1000 mm 900mm x 900 mm x 1250 mm 1350mm x 1350 mm x 1350 mm
  • Depending upon Material’s properties and screen sizes.
  • Vibro sifters also available in 12”, 24”, 36”, 48” & 72” sizes.