Automatic Capsule Polisher Model LI-CP uses the rotating brush principle to clean the capsules on continuous basis. Capsules are fed into the polishing chamber where a rotating spiral brush removes the powder particles sticking from the outer surface of capsules. The polishing chamber is to be connected to a vacuum cleaner to suck the de-dusted powder from the polishing chamber. This helps improving the polishing quality of Capsules.
- Complies as per cGMP standards
- All contact parts with the capsules made from Stainless Steel 304 or 316 material.
- The polishing chamber lined with nylon net.
- VFD Control Drive
- Separate Dust Collection System
- The polishing chamber inclination can be adjusted to suit the formulation.
- Provision of compressed air for cleaning the nylon brush.
- No change parts are required for different size of capsules.
- Easy to dismantle, wash and reassemble.
- No maintenance is required for polishing machine except for periodic cleaning,
- Compact size design, easy to shift and occupies minimum floor area.
- Mounted on a stand with locking type wheels and can be freely moved about and taken to any place for putting it in operation.
||230 Volts, 1 Phase, 50 Hertz
||915 mm X 356 mm X 915 mm