Automatic Digital (Electronic) Liquid Filling Machine

Automatic Digital (Electronic) Liquid Filling Machine, Model LI-DF: Containers moving on SS Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centring of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. The Digital filling system arrangement is standard features of the machine. The motor for filling is servo drive and conveyor drive are AC Motor with synchronized variable AC Frequency Drive. PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set

Special Features of Automatic Digital Liquid Filling Machine:

  • Accuracy ± 0.8 % or 0.5Gram in single doze (Whichever is higher).
  • No change parts require.
  • Individual volume control for all syringes.
  • Different speeds can be set, depending on fill volume and foaming nature of material.
  • Body covered with SS sheet.
  • All contact parts silicon tubing and S.S.316.
  • A unit to fill variety of liquid and can be used for various type of containers.
  • No dropping or last drop problem
  • No bottle no filling system.
  • 25 Liter Holding Tank fitted with Machine.
  • Facility provided for the fine tuning of the volume.
  • Inbuilt protection against over current, voltage fluctuation, short circuit in AC frequency Drive.
  • Ideal for aseptic, sheer sensitive, viscous, and corrosive liquids also.

Technical Specification of Automatic Digital Liquid Filling Machine:

Model No. LI-DF 2 LI-DF 4
Production Output 30 to 40 Bottles/ Min 50 to 60 Bottles/ Min
Electrical 3.5 HP, 440 Volts,3 Phase, 50 Hz, 4 Wire System 5.5 HP, 440 Volts,3 Phase, 50 Hz, 4 Wire System
Process Direction Left to Right Left to Right
No. of Filling Head Two Four
Filling Range 10 ml to 1000 ml 10 ml to 1000 ml
Conveyor Height 850 – 900 mm adjustable 850 – 900 mm adjustable
Overall Dimension 1600mm X 1110 mm X 1830 mm 1600mm X 1110 mm X 1830 mm
* High Speed Servo Pump Based Liquid Filling Machine Models Available Up to 12 Heads
* Specification can be changed as per customers’ requirements