Skip to main content

Automatic Eye Drop Filling and Capping Machine

Eye Drop Filler & Capper Machine

Automatic Eye Drop Filling and Capping Machine Manufacturer

Automatic Eye Drop Filling and Capping Machine Model: LI-EFC 40, The machine consists of one Side turntables, S.S. slat conveyor belt, eccentric pre-gassing, filling & post–gassing S.S. -316 nozzles precision-built S.S. – 316 Syringes, silicon rubber tubings, pneumatic system for inner cap placement, mechanical orientation type bowl & chute for outer cap placement, easy – reach compact panel etc. Due to its minimum distance between filling and stoppering, the risk of contamination is reduced. It is designed for operating in a sterile area and for utilizing it under laminar flow protection. The un-scrambler itself has been designed in the machine to eliminate dead ends and difficult to clean spot.

Chat with Expert Order Now Ask for Catalogue

Salient Features:

  • Filling, Inner Cap Placement & Screw Capping Unit is completely in corporate in single body Structure.
  • Pneumatic System for Inner Cap Placement
  • Mechanical Orientation type Bowl & Chute for Screw Cap Placement
  • All Liquid Contact Parts are of S.S. 316, the Body Structure is built up of S.S. 304 Pipe.
  • Co-eccentric Nozzles allows very quick and precise setting and making unit compact and manageable.
  • No vial, No Cap – Machine Stop System.
  • Easy reach compact panel provides ease and operation
  • Minimum Change over Time. From one size of container or fill size to another.
  • Each Important individual part required for autoclaving/ sterilization can be removed easily.

Technical Specification:

Model LI-EFC 40
Speed 40 to 60 Vials/ min.
Filling Volume 0.1 ml to 50 ml
Cap Diameter 20 mm, 25 mm & 28 mm
Filling Accuracy ±1 % on Single Dose
Power Characteristics 440v 3 Phase 50Hz 4 Wire System
Overall Dimension 900 x 900 x 1400 mm
Net Weight 550 Kilograms

Industries Using Automatic Eye Drop Filling and Capping Machine

  • Pharmaceutical Industry Conveying, feeding, inspection and line-support equipment.
  • Ayurvedic Industry Line automation for herbal liquid and solid packing.
  • Cosmetic Industry Bottle handling and feeding on personal-care lines.
  • Food Industry Conveyors, feeders and turntables on food packing lines.
  • Nutraceutical Industry Supplement line handling and accumulation.
  • Chemicals Industry Container handling on chemical packing lines.

Automatic Eye Drop Filling and Capping Machine FAQs

The LI-EFC 40 is a compact monoblock machine integrating filling, inner cap placement, and screw capping in a single sterile body — designed for ophthalmic solution manufacturing.

Filling, inner cap placement, and screw capping occur within one enclosed structure — minimizing open-container exposure and contamination risk.

The LI-EFC 40 operates at 40–120 bottles per minute depending on bottle size, fill volume, and formulation type.

Handles LDPE bottles (5–15 ml), glass eye drop bottles, and integrated nozzle-cap formats used in pharma and Ayurvedic ophthalmics.

Bottles move via SS slat conveyor to a star wheel indexing system for filling, inner cap placement, and torque-controlled screw capping.

Yes — SS 304 body, SS 316 contact parts, and sterile-zone compatibility ensure compliance with Schedule M, WHO-GMP, and USFDA norms.

Antibiotic, anti-inflammatory, antiglaucoma, antifungal, lubricating, mydriatic, and combination ophthalmic solutions.

Inert gas flushing before and after filling reduces oxygen exposure — protecting oxidation-sensitive formulations.

Minimizes sterile liquid exposure time — strengthening sterility assurance in ophthalmic filling.

Yes — designed for operation under LAF in sterile Grade A environments with minimal turbulence zones.

Automated pneumatic placement ensures contamination-free and consistent inner plug positioning.

A mechanical orientation bowl aligns caps before torque-controlled screw capping.

Yes — consistent filling accuracy, gas control, and sensor systems support full pharma validation protocols.

Sensors detect bottle presence, missing caps, fill errors, and automatically reject defective units.

Yes — compatible with open/closed RABS and isolator systems for enhanced sterility assurance.

Yes — supports sterile filling of Triphala, rose water, tulsi-based eye drops and other Ayurvedic solutions.

Yes — monoblock sterile design and SS 316 contact parts align with Schedule T and AYUSH GMP guidelines.

Yes — suitable for WHO-GMP, EU GMP Annex 1, USFDA, and international regulatory submissions.

Yes — its 40–120 BPM range supports pilot batches through full commercial production.

Yes — provides a long-term, validated sterile filling platform that scales with production demand.

What Pharmaceutical Manufacturers Say About Us

Verified reviews from pharmaceutical manufacturers running our equipment.

Very good quality pharmaceutical machinery manufacturer. Using tablet press machine, ointment tube filling line, Liquid Filling Line and ancillary equipments from last 3 years. Good quality machines and support

U Urvashi Jain

Very High Quality Pharmaceutical Machines. Our company using capsule filling and tablet manufacturing line from this company... Very nice service and support. Recently ordered rotary tube filling machine. Specially thanks to Mr. Dhananjay and Team for support

V Vanshi Sharma

Top-notch pharmaceutical machinery producer located in Ahmedabad. We have been utilizing the Capsule Filling Machine and servo liquid filling machine for the past two years, benefiting from excellent service support provided by LODHA.

A Amit Gupta

High quality pharmaceutical machinery manufacturer in Ahmedabad. We are using liquid filling machine from last 2 years in Australia with great service support by LODHA Team

T Taksh Vyas

Very Good Pharmaceutical Equipment. The best manufacturer of tablet press machines, with excellent assistance from the Lodha team.

A Alka Prajapati

Highly recommended this company for Capsule Machinery and equipment, we purchase Capsule Filling Machine since 3 year and we are very satisfied from that one, & Specifically thanks to Mr. Dhananjay Lodha for always quick support and service.

S Sunayna Rajput

Specially thanks to Mr. Dhananjay Lodha for quick support and service provided for capsule filling machine and tablet press we bought last year. Highly recommended this company for capsule and tablet production equipments.

A Ashok Vaghela

Related Products

Automatic Eye Drop Filling and Capping Machine Packing Conveyor Turn Table Online Visual Bottle Vial Inspection Table