Skip to main content

Tube Filling Machine - Semi Automatic Tube Filling Machine

Semi Automatic Tube Filling Machine

Semi Automatic Tube Filling Machine Manufacturer

LODHA specially designed very cost-effective Tube Filling Machine providing several features for pharmaceutical, food, paint, beverages and cosmetic industry. The design of the Tube Filler Machine is ergonomic, easy to handle and maintain for operators. It incorporates a full-size opening of the front guard with excellent access for maintenance and change-over and an improved Tube orientation system that guarantees even better accuracy. The machine is mainly mechanical and therefore, easy to operate and maintain.

LI-STF model is designed to fill and seal Plastic and Laminated tubes. The Tube Filling Machine machine is suitable mainly for pharmaceutical, cosmetic and food industry. This filling machine for Tube model is widely uses for filling of cream, ointment, gel, paste, balm and other similar viscous products by means of a volumetric dosing system.

Chat with Expert Order Now Ask for Catalogue

Process Operation:

Our semi automatic tube filling machine model body is constructed with mild steel angle and plates duly painted to smooth finish and outer covered to Stainless Steel covers. The filling area contact parts made of Stainless Steel 304 quality steel including the hopper. The filling mechanism is mechanically driven with a positive suction pump assembly. syringe can be provided as per the fill volume of different variants one with each machine. No tube no filling process sensors connected to a pneumatic cylinder which enables filling only when the tube is sensed at the filling area. All pneumatic cut off device ensures clean cut off and ensures weight accuracy at all times.

The heating of the Lami or the Plastic tubes is done by a standard heater which has a capability of attaining max temperature up to 700°C during constant air flow is on. At the heating section the tube is lifted inside the heater part by which only the area to be sealed is heated without affecting the filled material. The sealing of the Lami and the plastic tube is done in a single station with pneumatic jaws which has provision of holding no in its made pockets. After the sealing the trimming if also done by pneumatic blades to give the tube a smooth finish.
Batch types of numeric 0 to 9 are provided with the machine extra types can be bought on request.

Special Features of Tube Filling Machine:

  • Manually Tube feeding
  • Rotary type & compact design
  • Filling range 5 gm to 50 gm
  • Filling accuracy ± 1 %
  • Correct & uniform filling
  • No tube No Filling Mechanism
  • Tube sealing, coding & cutting by Pneumatic cylinder
  • Hot air system for tube sealing by leister heater & blower
  • Batch coding Number (Male or Female) also available
  • Tube cooling by water pump to circulate water outside tube portion for improve sealing quality.
  • Quick changeover for Combo Models
  • No tails are occurred after filling time
  • All the contact parts in S.S. 304/316/316L as per your requirement
  • Production counter available on control panel to indicate number of tube filled
  • Lower maintenance requires
  • Automatic tube ejection.
  • All pneumatic parts of “Janatics”, “Festo” or “Spac” make

Optional Accessories of Tube Filler :

  • Jacketed Hopper with Stirrer
  • Automatic Tube Orientation System
  • Extra Size Syringe Set
  • Air Compressor

Technical Specification:

Model No. LI – STF LI- STFD
No. of Filling Head Single Head Double Head
No. of Station (Geneva Cam Driven) 12 12
Hopper Capacity 25 Litre 35 Litre
Production Output (Per Min) 27 - 30 tubes 55 - 60 tubes
Tube Diameter 12 to 50 mm
Tube Length 50 to 200 mm
Tube Loading System Manual /Automatic
Tube Orientation Manual/ Automatic
Max. Filling Capacity 5 to 200 grams 5 to 50 grams
Syringe Option
  • 5 to 30 grams
  • 30 to 100 grams
  • 100 to 200 grams
  • 5 to 25 grams
  • 25 to 50 grams
Air Heater 2 Kw 2.5 Kw
Water Pump 9For cooling of the heater) 0.25 H.P. 0.50 H.P.
Power 1 H.P. 1 H.P.
Electrical 440 Volts, 3 Phase, 50 hertz, four wire system
Compressed Air 10 Bar 12 Bar
Operator Required 1 Person 1 or 2 Person
Machine Dimension 900 mm x 1100 mm x 1800 mm 900 mm x 1100 mm x 1800 mm
Net Weight 295 Kgs. 465 Kgs.
Gross Weight 375 Kgs. 580 Kgs.

Watch Our Semi Automatic Tube Filling Machine Video

Industries Using Tube Filling Machine - Semi Automatic Tube Filling Machine

  • Pharmaceutical Industry Blister, strip and carton packing of tablets, capsules and ampoules.
  • Ayurvedic Industry Herbal tablets, capsules and sachets in retail packs.
  • Nutraceutical Industry Supplement blisters, sachets and retail cartons.
  • Food Industry Confectionery, premix and single-serve food packing.
  • Cosmetic Industry Cartoning of tubes, bottles and personal-care kits.
  • Laboratories & Research Centers Small-batch and sample packing for trials.

Semi Automatic Tube Filling Machine FAQs

It is a partially automated machine that combines mechanical filling and sealing operations with minimal manual assistance — offering an affordable and efficient tube packaging solution between manual and fully automatic systems.

In a semi automatic machine, the operator manually loads tubes before automatic filling and sealing. Fully automatic machines handle loading, filling, sealing, and ejection without manual intervention.

They offer cost-effective mechanized tube packaging with professional sealing and consistent filling without high capital investment.

Yes. Ideal for herbal balms, creams, ointments, and gel formulations meeting AYUSH standards.

Yes. Perfect for beauty brands packaging creams, gels, lotions, and hair products in tubes.

Supports aluminum tubes, ABL, PBL, and co-extruded plastic tubes.

Typically fills and seals 20–60 tubes per minute depending on operator efficiency.

Provides ±2% fill accuracy using adjustable piston filling systems.

Supports hot air sealing, impulse sealing for laminated tubes, and mechanical fold sealing for aluminum tubes.

Yes. Built with SS 316 contact parts and stainless steel body meeting GMP standards.

Yes. Optional hot stamp coding can emboss batch and expiry details.

Yes. Heated hopper option ensures smooth filling of thick creams and balms.

Supports 13–50 mm diameter and 50–200 mm tube lengths.

Yes. Simple manual loading with easy mechanical controls.

Changeovers can be completed in under 30 minutes.

Operates on 220V single-phase power with compressed air connection.

Yes. Ideal for small batch, multi-product operations.

Many manufacturers later upgrade to fully automatic systems as volumes grow.

Yes. Provides installation, operator training, and after-sales service support.

Contact Lodha Pharma with tube type, fill volume, viscosity, and production requirements to receive a customized quotation and demo.

What Pharmaceutical Manufacturers Say About Us

Verified reviews from pharmaceutical manufacturers running our equipment.

Very good quality pharmaceutical machinery manufacturer. Using tablet press machine, ointment tube filling line, Liquid Filling Line and ancillary equipments from last 3 years. Good quality machines and support

U Urvashi Jain

Very High Quality Pharmaceutical Machines. Our company using capsule filling and tablet manufacturing line from this company... Very nice service and support. Recently ordered rotary tube filling machine. Specially thanks to Mr. Dhananjay and Team for support

V Vanshi Sharma

Top-notch pharmaceutical machinery producer located in Ahmedabad. We have been utilizing the Capsule Filling Machine and servo liquid filling machine for the past two years, benefiting from excellent service support provided by LODHA.

A Amit Gupta

High quality pharmaceutical machinery manufacturer in Ahmedabad. We are using liquid filling machine from last 2 years in Australia with great service support by LODHA Team

T Taksh Vyas

Very Good Pharmaceutical Equipment. The best manufacturer of tablet press machines, with excellent assistance from the Lodha team.

A Alka Prajapati

Highly recommended this company for Capsule Machinery and equipment, we purchase Capsule Filling Machine since 3 year and we are very satisfied from that one, & Specifically thanks to Mr. Dhananjay Lodha for always quick support and service.

S Sunayna Rajput

Specially thanks to Mr. Dhananjay Lodha for quick support and service provided for capsule filling machine and tablet press we bought last year. Highly recommended this company for capsule and tablet production equipments.

A Ashok Vaghela

Related Products

Alu Alu Blister Packing Machine PVC ALU Blister Packing Machine Fully Automatic Linear Tube Filling Machine Laminated Tube Filling and Sealing Machine Aluminium Tube Filling Sealing Machine High Speed Blister Packing Machine Automatic Strip Packing Machine Semi Automatic Tube Filling Machine Semi Automatic Cartooning Machine